MX Linux - Netgear A6210 driver install.

Putting this here so I don't have to go searching again....
 

Tried to get a couple of usb adapters installed on MX linux (buster).

Initially i started with older TP-link USB adapaters 

TL-WN821N and TL-WN822N

However whilst the driver would install and the device was listed in lsusb output, I could never get it working...

In the end I swapped to a netgear adapter A6210.

Using the following articles as reference I was able to get this working.

https://community.netgear.com/t5/WiFi-Adapters/Netgear-A6210-compiling-Linux-driver/td-p/1711232

https://community.netgear.com/t5/WiFi-Adapters/A6210-ADAPTER-ON-LINUX-UBUNTU/td-p/1062677

But these are the commands I used to install this.

git clone -b port-to-4.15 https://github.com/kaduke/Netgear-A6210.git

cd Netgear-A6210

make

sudo make install

 

I got some warnings during the compile, but everything worked when I plugged the usb adapter in.

MX Linux - Netgear A6210 driver install.